|Made In U.S.A. |
Digital Position Indicators
- Easily mount the compact TD-30 indicator on all types of machinery and equipment where there is an adjusting handwheel or crank and fasten with a set screw.
- Provides exact, incremental position readings on manually adjusted control shafts or spindles from a fraction of a turn to multiple turns.
- TD-30-High impact injection molded housing (blue, black, gray, or orange).
- TD-40 - Zinc Aluminum Alloy machined casting (blue or black).
- Steel shaft collar with black oxide finish.
- Housing designed with an advanced locking seal system to prevent unwanted cover separations and to provide dust-free operation.
- Five digit counter with clockwise or counter-clockwise rotation available in 10 standard ratios. (See Ratio Table).
- Available for horizontal or vertical mounting with four different viewing angles (See Fig.1).
- Supplied with 0.060 (1.52mm) self adhesive foam mounting gasket.
Ideal for use on these types of machines:
Reduce set-up time and allow repeatable manual position changes and settings for positioning variable speed drives, distance between rollers, gate widths, valves and any other equipment controlled by rotary or screw motion.
|TD- 30 Plastic
||- Ratio displays after 1 revolution|
||- Decimal can be placed at any position|
||- Special ratios available on request|
||(ie metric equivalents)|
Other Ordering Information
|TD 30 / TD 40
|(1) -- Model No.
||TD 30 /TD-40|
|(2) -- Mounting Position
||A, B, C or D (refer to Fig. 1)|
|(3) -- Reading After 1 Revolution
||Ratio from table above (others available)|
|(4) -- Counting Direction
||CW - Clockwise, CCW - Counterclockwise
|(5) -- Bore Diameter
||Choose bore diameter, up to 1" or 25.4mm|
|(6) -- Color
||Blue, Black, Gray, Orange|